DDS/PLL-based Wide-band Programmable Oscillator Module Model PCK-8200

DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering
DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering
DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering
Back to DST Product List page

DDS-PLL based Programmable Oscillator Module
Model PCL-850

PCL-850 is wide band clock source utilizing Direct Digital Synthesis and Phase
Locked Loop technique. It provides any frequency output from 1MHz to 850MHz in
1Hz step. The frequency can be controlled by parallel data such as DIP SW or
serial data which can be connected to PC communication port.

FEATURES

  • Wide band(1MHz-850MHz), high resolution(1Hz)
  • Single power supply +3.3V
  • Frequency controlled by parallel and serial data
  • Frequency memorized into EEPROM in spite of ON/OFF setting
  • Low jitter
  • 64CH Memory
  • Memory can be selected by parallel data channel
  • Compact

APPLICATION

  • Various clock source
  • Numericaly controlled oscillator
  • Signal generator
  • Sweep oscillator


  SPECIFICATION

Power Supply +3.3V ±5%, 250mA
Frequency range 1,000,000Hz-850,000,000Hz
Output Level 3.3V diffrential LVPECL output
Frequency resolution 1Hz
Frequency Accuracy ±20ppm, at 25 degrees C
Frequency stability ±20ppm, 0-50 degrees C
Jitter 1MHz-400MHz 30pSrms
400MHz-850MHz 50pSrms(Cycle to Cycle)
Spurious 1MHz-400MHz more than -45dB
400MHz-850MHz more than -32db
Non-Voltile memory save times more than 10,000
Frequency Control Parallel input 7bits control lines
    6 bit memory CH selection lines
    1 bit strobe signal

Serial input, 2 wires
    9600 BPS,8bit, without parity
    1 stop bit,
    ASCII 9 digit numeric data and delimitter.
Frequency switching time within 5mS(time from setting freq. data to getting signal)
Dimensions 40x32.5x13mm





Refer to the User's Manual

  PCL-850.pdf

OPTION Frequency setting board FIX-PCL850

Frequency setting board FIX-PCL850 can be set frequency easily with BCD switches.
A frequency and setting value can be memorized with a save switch on the board.
When the module is used for itself, it is used as a memory setting tool of the parameter.
Just insert the module to the sockets of the board. Also, the detaching is easy.
For more information, click below.
  FIX-PCL850.pdf

Back to DST Product List page

Digital Signal Technology, Inc. ©2001 All Rights Reserved.
Japan’s Leading Custom Engineering House of RF, Microwave & High-Speed Logic Circuitry Design & Manufacturing