DDS-based Dual Channel Programmable Phase Generator Model PPG-20
DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering
DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering
DST - RF, Microwave and Hi-speed Logic Engineering House RF amd Microwave custom engineering
Home New Products Product List Price & Delivery How To Order Manuals About DST Contact Us
Back to DST Product List page

DDS-based Dual Channel Programmable Phase Generator
Model PPG-20
Utilizing Direct Digital Synthesis technique, PPG-20 can generate
two sine waves from 100Hz to 20MHz in 1Hz step with any desired
phase difference. PPG-20 can be used for stand-alone dual channel
signal source. The output signal amplitude can be varied from
0.1V to 1V in 1mV step.

FEATURES
  • Phase diffirence in 0.1 deg. resolution
  • Wideband(100Hz - 20MHz) High resolution(1Hz)
  • Signal Power Supply +5V
  • Settings controlled by parallel and serial data
  • Settings stored in non-volatile memory
  • Low jitter
  • High stability by external clock input(10MHz)
  • Compact

APPLICATION
  • Signal source with phase control
  • Phase generator
  • Orthogonal signal source
  • Numerically Controlled Oscillator
  • Dual channel Signal Generator
 


  SPECIFICATION
Output impedance 50ohm
Output Frequency range 100Hz - 20,000,000Hz
Frequency resolution 1Hz
Phase setting range 0 - 359 deg.
Phase resolution 0.1deg.
Absolute phase accuracy ±2 @10MHz
Frequency accuracy Internal : ±20ppm,0 - 50degrees C(Adjustable)
External : depends on external clock accuracy
Output level 0.1 - 1.0Vp-p (50ohm termination)
Output level resolution 1mV
Output level accuracy ±10%
Spurious -40dB
Frequency save times more than 10,000
Frequency Control Parallel input : nine(9) control pins, 4 bits BCD input, 1 bit digit/data selection, 1 bit strobe signal, 3 bit mode selection
Serial input : two(2) data pins, 9600BPS, 8 bit, non parity
1 stop bit, ASCII data and carriage return code.
External clock input 10MHz(TTL or CMOS)
Frequency switching time within 2mS (time from the end of data loading )
Power Supply/Current +5V±5%, 400mA
Dimensions 61x46x16mm

Refer to the User's Manual

  PPG-20_u.pdf

OPTION Frequency setting board FIX-20
Frequency setting board FIX-20 can be set frequency easily with BCD switches.
A frequency and setting value can be memorized with a save switch on the board.
When the module is used for itself, it is used as a memory setting tool of the parameter.
Just insert the module to the sockets of the board. Also, the detaching is easy.
For more information, click below.
  FIX-20_u.pdf

Back to DST Product List page

Digital Signal Technology, Inc. ©2001 All Rights Reserved.
Japan’s Leading Custom Engineering House of RF, Microwave & High-Speed Logic Circuitry Design & Manufacturing