PROGRAMABLE PHASE GENERATOR PPG-20 |
| Output impedance | 50ohm |
| Output Frequency range | 100Hz - 20,000,000Hz |
| Frequency resolution | 1Hz |
| Phase setting range | 0 - 359 deg. |
| Phase resolution | 0.1deg. |
| Absolute phase accuracy | ±2 @10MHz |
| Frequency accuracy | Internal : ±20ppm,0 - 50degrees C(Adjustable) External : depends on external clock accuracy |
| Output level | 0.1 - 1.0Vp-p (50ohm termination) |
| Output level resolution | 1mV |
| Output level accuracy | ±10% |
| Spurious | -40dB |
| Frequency save times | more than 10,000 |
| Frequency Control |
Parallel input : nine(9) control pins, 4 bits BCD input,
1 bit digit/data selection, 1 bit strobe signal,
3 bit mode selection Serial input : two(2) data pins, 9600BPS, 8 bit, non parity 1 stop bit, ASCII data and carriage return code. |
| External clock input | 10MHz(TTL or CMOS) |
| Frequency switching time | within 2mS (time from the end of data loading ) |
| Power Supply/Current | +5V±5%, 400mA |
| Dimensions | 61x46x16mm |
Frequency setting board FIX-20 can be set frequency easily
with BCD switches.
A frequency and setting value can be memorized with a save
switch on the board.
When the module is used for itself, it is used
as a memory setting tool of the parameter.
Just insert the module to the sockets of the board. Also, the detaching is easy.
For more information, click below.