Model Vector network analyzer DZV-1

Model Vector network analyzer DZV-1
Model Vector network analyzer DZV-1

Other Components

Signal Components

Product Summary

2 ports Vector Network Analyzer(S11,S21,S12,S22 can be measured)

Application

  • The antenna measurement
    Return loss • VSWR • Band width • Impedance, The measurement of the connector/cable
    Insertion loss • Phase • Return loss, The RF component measurement
    Filter • Coupler
    Duplexer • Circulator
    Amplifier, The measurement of fr and fa of the crystal oscillator
    fr(Series resonant frequency)
    fa(Parallel resonance freauency)

Specification

※You can see it by scrolling

Measuring frequency range 100kHz-500MHz
Dynamic range 75dB(@100kHz-200MHz), about 50dB@500MHz
Connector SMA-J
Consumption current 310mA(when standing-by), 430mA(When measuring)
Interface USB 2.0
Accessories The USB cable (1m)
The software of the side of the PC The operation is similar to 8753D(Keysight)
    MEAS S11,S21,S12,S22
    FORM LOG MAG, PHASE, DELAY, SMITH, POLAR, SWR
    Required
    environment
WinXP(32), the Windows on or after 7,8,8.1 or 10(32 bit or 64-bit version)
The option CAL Kit (DCAL-1)

Size / Weight

※You can see it by scrolling

Outside dimension W112 x D120 x H35 mm

Reference material

Block diagram

Option

※You can see it by scrolling

DCA-1

option image

This Cal Kit is very convenient to proceed calibration of 50 ohm impedance. OPEN, SHORT, LOAD AND THROUGH ports are on the board.
  • Function
    1. LOAD port
      Return loss
      55dB(typ) @50MHz
      55dB(typ) @500MHz
      40dB(typ) @3GHz
    2. SHORT port
      Impedance
      <140M ohm @50MHz
      <300M ohm @500MHz
      <400M ohm @3GHz
    3. OPEN port
      Impedance
      >10k ohm @50MHz
      > 4k ohm @500MHz
      > 2k ohm @3GHz
    4. THROUGH port
      S21
      >0.005dB @50MHz
      >0.01 dB @500MHz
      >0.035dB @3GHz
  • Outside dimension : 90 x 50 mm

Search by product

Search by part number

Search by frequency

Search by feature