Frequency Synthesizer Model : DPL-6GF
Frequency Synthesizer
Programmable Frequency Synthesizer
Product Summary
DPL-6GF is a frequency synthesizer which can generate approximately ±5% of the specified frequency from 50MHz to 6GHz in 1kHz or 2KHz step.
Specify the frequency you desire in advance before placing an order but when no output filter is selected as an option, a programmable output in a 1KHz step is allowed from 50MHz to 3GHz (No longer a sine wave).
Specify the frequency you desire in advance before placing an order but when no output filter is selected as an option, a programmable output in a 1KHz step is allowed from 50MHz to 3GHz (No longer a sine wave).
Specification
※You can see it by scrolling
| Power Supply / Current |
+5V±5%, <600mA | |
|---|---|---|
| Frequency Range |
50MHz to 6GHz (band width 10%) |
|
| Frequency Resolution | 50MHz to <3GHz | 1kHz step |
| >3GHz to 6GHz | 2khz step | |
| Output Level | >+10dBm | |
| Output Impedance | 50 Ohm | |
| Spurious | <-65dBc | |
| Output Harmonic Level | <-40dBc (in case of no output filter : <-8dbc) | |
| Internal Reference Clock Accurary | <±15ppm 0 to 50 degC | |
| External Reference Clock and Level | 10MHz -6dBm to +6dBm | |
| Lock Time | Max 40msec | |
| Interface |
(1) Asynchronous Serial Comminication
9600bps, 8bits, one stop bits, non-parity 3 bytes data 3.3V CMOS level |
|
Environmental condition
※You can see it by scrolling
| Operating Temperature Range |
0 to 50 degC (In case a thermal resistance 6.5(degC/W) heat sink has been installed.) |
|---|
Size / Weight
※You can see it by scrolling
| Outer Dimensions |
50 x 50 x 12.5 mm 50 x 50 x 33.5 mm (with Heat sink) |
|---|
Phase noise
※You can see it by scrolling
Phase Noise (Typical)@6GHz
| Offset frequency [Hz] | Phase Noise [dBc/Hz] |
|---|---|
| 100 | -80 |
| 1k | -97 |
| 10k | -102 |
| 100k | -99 |
| 1M | -126 |
Reference material
Block diagram
Option
※You can see it by scrolling
- When no output filter is selected as an option, a programmable output in a 1 kHz step is allowed in a broad band from 50MHz to 3GHz (No longer a sine wave)
- USB Interface USBIF-01
- Multiplier Unit DMUL-1
- Manual download
- Input Frequency : 3GHz to 6GHz
Output Frequency : approx.±5% of the specified frequency from 6GHz to 12GHz